2013 Publications

Akamatsu, M., Green, P., and Bengler, K. “Advances of Human Factors Research for Future Vehicular Technology,” International Journal of Vehicular Technology, 2013; 2013.

Akamatsu, M., Green, P., and Bengler, K. “Automotive Technology and Human Factors Research: Past, Present and Future,” International Journal of Vehicular Technology, Volume 2013, Article ID 526180, 27 pages, 2013.

Bi, L., Luo, N., Fan, X., Jie, K., Li, Y., and Y. Liu “A Head-Up Display-based P300 Brain-Computer Interface for Destination Selection,” Intelligent Transportation Systems, IEEE Transactions on Intelligent Transportation Systems, 14(4): 1996-2001, 2013.

Bi, L., Fan, X., Chen, H., Liu, Y. “EEG-based Brain-controlled Mobile Robots,” IEEE Transactions on Human-Machine Systems, accepted 2013.

Bi, L., Fan, X., Jie, K., Teng, T., Ding, H., Liu, Y. “Using a Head-Up Display-Based Steady-State Visually Evoked Potential Brain-Computer Interface,” IEEE Transactions on Intelligent Transportation Systems, 15(3), 2013.

Bi, L., Gan, G., Shang, J., Liu, Y. “Queuing Network Modeling of Driver Lateral Control with or without a Cognitive Distraction Task,” IEEE Transactions on Intelligent Transportation Systems, accepted 2013.

Bonfiglioli, R, Mattioli, S, Armstrong, TJ, Graziosi, F, Marinelli, F, Farioli, A, Violante, FS. “Validation of the ACGIH TLV for Hand Activity Level in the OCTOPUS Cohort: A Two-year Longitudinal Study of Carpal Tunnel Syndrome,” Scand J. Work Environ Health, 39(2):155-63, March 2013.

Bryan, A., Hu, S., Koren, Y. “Assembly System Reconfiguration Planning,” Journal of Manufacturing Science and Engineering, Transactions of the ASME. 2013;135(4).

Cai, H., Green, P., Kim, J. “Estimating the Legibility of a Singular Letter E Viewed at Different Display Angles,” Applied Ergonomics, 2013;44(4):575-587.

Cao, S., and Liu, Y. “Concurrent Processing of Vehicle Lane Keeping and Speech Comprehension Tasks,” Accident Analysis and Prevention, 59: 46-54, 2013.

Cao, S., and Liu, Y. “Effects of Concurrent Tasks on Diagnostic Decision Making: An Experimental Investigation,” IIE Transactions on Healthcare Systems Engineering, 3: 254-262, 2013.

Cao, S., and Liu, Y. “Medical Decision Making Performance in Dual-Task Scenarios,” Proceedings of the Human Factors and Ergonomics Society, 2013:733-737.

Cao, S., Liu, Y. “Modeling Mental Workload in Cognitive and Concurrent Tasks with Time Stress Using an Integrated Cognitive Architecture,” IEEE Transactions on Human-Machine Systems, submitted 2013.

Cao, S., and Liu, Y. “QN-ACTR: An Integrated Cognitive Architecture for Modeling Complex Cognitive and Multitask Performance,” International Journal of Human Factors Modeling and Simulation, 4(1), pp. 63-86, 2013.

Cao, S., and Liu, Y. “Queueing Network-adaptive Control of Thought Rational (QN-ACTR): An Integrated Cognitive Architecture for Modelling Complex Cognitive and Multi-task Performance,” International Journal of Human Factors Modelling and Simulation, 4(1): 63-86, 2013.

Cao, S., and Liu, Y. “Queueing Network-ACTR Modeling of Concurrent Tasks Involving Multiple Controlled Processes,” Proceedings of the Human Factors and Ergonomics Society, 2013:768-772.

Ehrlich, P., Young, J., Ulin, S., Woolley, C., Armstrong, T., Buschmann, B., Galecki, A., and Ashton-Miller, J. “Feasibility and Safety of a Novel In-vivo Model to Assess Playground Falls in Children,” The Journal of Trauma and Acute Care Surgery, 75(1):54-59, 2013.

Ehrlich, P., Young, J., Ulin, S., Woolley, C., Armstrong, T., Galecki, A., Chen, S., Ashton-Miller, J., “Maximum Hand-Rung Coupling Forces in Children: The Effects of Handhold Diameter,” Human Factors, 55(3):3545-556, 2013.

Figueroa, R., Armstrong, T. and  Zhou, W.  “An Investigation of Hand Force Distribution, Hand Posture and Surface Orientation,” The Journal of Ergonomics, 2013.

Figueroa, R. and Armstrong, T. “Considering Task Force Requirements For Hand Posture Predictions,” Proceedings of Human Factors and Ergonomics Conference and Exposition, California, October 2013.

Frischknecht, A. C., Kasten, S. J., Hamstra, S. J., Perkins, N. C., Gillespie, R. B., Armstrong, T. J., & Minter, R. M. “The Objective Assessment of Experts’ and Novices’ Suturing Skills Using an Image Analysis Program,” Academic Medicine, 88(2), 260-264, 2013.

Gatti, C.J., Hallstrom, B.R., Hughes, R.E. “Surgeon Variability in Total Knee Arthroplasty Component Alignment: A Monte Carlo Analysis,” Computer Methods in Biomechanics and Biomedical Engineering, accepted 2013.

Green, P., Park, J. “Evaluation of a Navigation Radio Using the Think-aloud Method,” International Journal of Vehicular Technology, 2013;2013.

Guo, W., Jin, J., Hu, S. “Allocation of Maintenance Resources in Mixed Model Assembly Systems,” Journal of Manufacturing Systems, 2013;32(3):473-479.

Han, S., Lee, S., Armstrong, T. “Automated 3D Skeleton Extraction from Multiple Videos for Biomechanical Analysis on Sites,” Eighth International Scientific Conference on Prevention of Work-Related Musculoskeletal Disorders, PREMUS 2013, Busan, Korea, July 8-11, 2013.

Hoffenson, S., Reed, M.P., Kaewbaidhoon, Y., and Papalambros, P.Y. “On the Impact of the Regulatory Frontal Crash Test Speed on Optimal Vehicle Design and Road Traffic Injuries,” International Journal of Vehicle Design, 63(1):39-60, 2013.

Hu, S.J. “Evolving Paradigms of Manufacturing: From Mass Production to Mass Customization and Personalization,” Procedia CIRP, 2013;7:3-8.

Hu, J., Wu, J., Klinich, K.D., Reed, M.P., Rupp, J.D., and Cao, L. “Optimizing the Rear Seat Environment for Older Children, Adults, and Infants,”  Traffic Injury Prevention. 14(Supplement 1):S13-S22, 2013.

Hu, J., Wu, J., Reed, M.P., Klinich, K.D., and Cao, L. “Rear Seat Restraint System Optimization for Older Children in Frontal Crashes,” Traffic Injury Prevention, 14(6):614-622, 2013.

Jin, X., Hu, S., Ni, J., Xiao, G. “Assembly Strategies for Remanufacturing Systems with Variable Quality Returns,” IEEE Transactions on Automation Science and Engineering, 2013;10(1):76-85.

Jones, M.L.H., Reed, M.P., Chaffin, D.B. “The Effect of Bracing Availability on One-hand Isometric Force Exertion Capability,” Ergonomics, 56(4): 667-681, 2013.

Kim, H.J., Martin, B.J. “Biodynamic Characteristics of Upper Limb Reaching Movements of the Seated Human under Whole-Body Vibration,” J Applied Biomechanics, in press 2013.

Kim, H.J., Martin, B.J. “Manual Movement Coordination Adapted to Spinal Cord Injury and Low Back Pain,” International J Industrial Ergo, 43(1): 1-8, 2013.

Kim, H.J., Martin, B.J. “Three-dimensional Vibration Transmission Through the Upper Limb When Performing Reaching Movements in Vehicle,” Int J Human Factors Modeling & Simulation, in press 2013.

Klinich, K.D., Manary, M.A. Flannagan, C.A.C., Ebert, S.M., Malik, L.A., Green, P.A. and Reed, M.P. “Effect of Child Restraint Features on Installation Errors,”Applied Ergonomics, 45(2), 270-277, 2014.

Lee, BC, Martin, BJ, Ho, A, and Sienko, KH. “Postural Reorganization Induced by Torso Cutaneous Covibration,” J Neurosci, 33(18): 7870-7876, 2013.

Lee, BC, Martin, BJ, and Sienko, KH. “The Effects of Actuator Selection on Non-volitional Postural Responses to Torso-based Vibrotactile Stimulation,” Journal of Neuroengineering and Rehabilitation, 10: 21, 2013.

Lee, D., Ulrich, B., Martin, B.J. “Functioning of Peripheral Ia pathways in Infants with Myelomeningocele,” Infant Behavior and Development, 36: 147-161, 2013.

Li, H., Wickens, C., Sarter, N., Sebok, A. “Stages and Levels of Automation in Support of Space Teleoperations,” Human Factors, in press 2013.

Li, H., Sarter, N., Wickens, C., and Sebok, A. “Supporting Human-Automation Collaboration Through Dynamic Function Allocation: The Case of Space Teleoperation,” Proceedings of the 56th Annual Meeting of the Human Factors and Ergonomics Society (HFES), San Diego, CA. September 2013.

Li, S., Wang, H., Hu, S. “Assembly System Configuration Design for a Product Family,” Transactions of the North American Manufacturing Research Institution of SME, 2013;41:9-20.

Lo, V., Green, P. “Development and Evaluation of Autmotive Speech Interfaces: Useful Information from the Human Factors and the Related Literature,” International Journal of Vehicular Technology, 2013;2013.

Lu, S., Wickens, C., Prinet, J., Hutchins, S., Sarter, N., Sebok, A. “Supporting Interruption Management and Multimodal Interface Design: Three Meta-Analyses of Task Performance as a Function of Interrupting Task Modality,” Human Factors, 55(4), 697-724, 2013.

Lu, S., Schumacher, R., Nemshak, M., and Seagull, F.J. “Identifying, Developing, and Quantifying Single-Day Quality Measures within the Neonatal ICU,” Proceedings of the 56th Annual Meeting of the Human Factors and Ergonomics Society (HFES), San Diego, CA. September 2013.

Macy, M.L, Freed, G.L., and Reed, M.P. “Child Passenger Restraints in Relation to Other Second Row Passengers: An Analysis of the 2007–2009 National Survey of the Use of Booster Seats,” Traffic Injury Prevention, 14(2):209-214, 2013.

Miller, C.S., Madura, N.H., Schneider, L.W., Klinich, K.D., Reed, M.P., and Rupp, J.D. “PMHS Impact Response in 3-m/s and 8-m/s Nearside Impacts with Abdomen Offset,” Stapp Car Crash Journal, 57:387-425, 2013.

Moacdieh, N., Prinet, J., and Sarter, N. “Effects of Modern Primary Flight Display Clutter: Evidence from Performance and Eye Tracking Data,” Proceedings of the 56th Annual Meeting of the Human Factors and Ergonomics Society (HFES), San Diego, CA. September 2013.

Nguyen, H., Wang, H., Hu, S. “Characterization of Cutting Force Induced Surface Shape Variation in Face Milling using High-definition Metrology,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2013;135(4).

Onnasch, L., Wickens, C., Li, H., and Manzey D. A. “Human Performance Consequences of Stages and Levels of Automation: An Integrated Meta-analysis,” Journal of Cognitive Engineering and Decision Making, 6(1):57-87, 2013.

Pitts, B., Lu, S., and Sarter, N. “Cross-modal Matching: The Development and Evaluation of a New Technique,” Proceedings of the 56th Annual Meeting of the Human Factors and Ergonomics Society (HFES), San Diego, CA, September 2013.

Reed, M.P. “Driver Preference for Fore-aft Steering Wheel Location,”  SAE International Journal of Passenger Cars – Mechanical Systems, 6(2):10, 2013.

Reed, M.P., and Rupp, J.D. “An Anthropometric Comparison of Current ATDs with the U.S. Adult Population,”  Traffic Injury Prevention, 14(7):703-705, 2013.

Reed, M.P., Ebert, S.M., and Hallman, J.J. “Effects of Driver Characteristics on Seat Belt Fit,” Stapp Car Crash Journal, 57:43-57, 2013.

Reed, M.P., Ebert-Hamilton, S.M., Klinich, K.D., Manary, M.A., and Rupp, J.D. “Effects of Vehicle Seat and Belt Geometry on Belt Fit for Children with and without Belt Positioning Booster Seats,”  Accident Analysis and Prevention, 50:512-22, 2013.

Riggs, R., Hu, S. “Disassembly Liaison Graphs Inspired by Word Clouds,” Procedia CIRP, 2013;7:521-526.

Rupp, J.D., Flannagan, C.A.C, Leslie, A.J., Hoff, C.N., Reed. M.P., and Cunningham, R.M.  “Effects of BMI on the Risk and Frequency of Serious Injury in Motor-vehicle Crashes,” Obesity, 21(1):88-97, 2013.

Sarter, N. “Multimodal Support for Interruption Management: Models, Empirical Findings and Design Recommendations,” Special Issue on “Perception Based Media Processing” of the Proceedings of the IEEE, in press 2013.

Sarter, N., Moacdieh, N., and Prinet, J. “Guidance and Tools for the Evaluation/Certification of Modern Primary Flight Displays,” Final Technical Report to the Federal Aviation Administration (FAA). October, 2013.

Scotland, S, Adamo, DE, and Martin, BJ. “Sense of Effort Revisited: Relative Contributions of Sensory Feedback and Efferent Copy,” Neuroscience letters. 561: 208-212, 2014.

Scotland, S., Das, S., Armstrong, T., Martin, B. “Haptic Manipulation of Objects on Multitouch Screens: Effects of Screen Elevation, Inclination and Task Requirements on Posture and Fatigue,” ACHI 2013, The Sixth International Conference on Advances in Computer-Human Interactions, p. 299-302, 2013.

Seo, J., Han, S., Lee, S., and Armstrong, T. “Dynamic Biomechanical Simulation for Identifying Risk Factors for WMSDs during Construction Tasks,” The 30th International Symposium on Automation and Robotics in Construction and Mining, Montreal, Quebec, Canada, August 11–15, 2013.

Seo, J., Han, S., Lee, S., and Armstrong, T. “Motion-data-driven Unsafe Pose Identification through Biomechanical Analysis,” Proceedings of the 2013 ASCE International Workshop on Computing in Civil Engineering, 2013: 693-700.

Srinvasan, D., Martin, B.J., and Reed, M.P. “Effects of Task Characteristics on Unimanual and Bimanual Movement Times,” Ergonomics, 56(4):612-622, 2013.

Tsai, M., Wang, K., Liu, Y., Hong, J. “Perceived Visual Aesthetics of Text-Overlaid Images: Computational Models for White-space Fraction and Experimental Research,” International Journal of Human-Computer Interaction, 30(1):1-23, 2013.

Wagner, D.W. and Reed, M.P. “Step Scaling and Behavior Selection in a Constrained Set of Manual Materials Handling Transfers,” Ergonomics, 56(6):964-975, 2013.

Wiggermann, N.E., Keyserling, W.M. “Effects of Anti-Fatigue Mats on Perceived Discomfort and Weight-Shifting During Prolonged Standing,” Human Factors, accepted 2013.

Woodrooffe, J., Blower, D., Flannagan, C., Bogard, S., Green, P., Bao, S. Automated Control and Brake Strategies for Future Crash Avoidance Systems – Potential Benefits, SAE Technical Papers, 2013;9.

Wu, J., Hu, J., Reed, M.P., and Cao, L. “A Simulation Study of Spine Biofidelity in the Hybrid-III 6-year-old ATD,” Traffic Injury Prevention. 14(4):397-404, 2013.

Young, J.G., Lin, J-H., Chang, C-C., McGorry, R. “The Natural Angle between the Hand and Handle and the Effect of Handle Orientation on Wrist Radial/Ulnar Deviation during Maximal Push Exertions,” Ergonomics, 56(4): 682-91, 2013.

Yu, D. (presenter), Kasten, S., and Armstrong, T. “Improving Postures during Microsurgery: The Effect of Flat-panel Heads-up Display on Sustained Exertions and Posture Loads,” 14th Annual Human Factors Engineering Inter-University Workshop. Waterloo, ON Canada, November, 2013.

Yu, D., Kasten, S., Green, C., and Armstrong, T. J. “Task analysis of microsurgery and biomechanical modeling of surgeons to assess static-workloads,” Proceedings of the Human Factors and Ergonomics Society Annual Meeting, 57(1): 1790-1794, 2013.

Yu, D. (presenter), Woolley C., Kasten, S., and Armstrong, T. “Using Perceived Efforts and Qualitative Analysis to Compare Microsurgery Displays,” International Symposium on Human Factors and Ergonomics in Health Care: Advancing the Cause. Baltimore, MD. March, 2013. (poster)

Zhou, W., Armstrong, T.J., Wegner, D.M., Reed, M.P. “Biomechanical Factor Affecting Part Handling Behavior: Object Weight,” Ergonomics, 2013.